One touch start
With one-click activation and beep sound, you can submerge the Osprey 200 Max in your pool to start cleaning automatically.
Copy Code
With one-click activation and beep sound, you can submerge the Osprey 200 Max in your pool to start cleaning automatically.
Ideal for Above Ground Pools and In-Ground Pools of flat bottom (max slope < 15°). Suitable for all linings : PVC, tiles, vinyl or gunite etc.
Suitable for all shapes : round, rectangular,or oval. Suggest the pool size not exceed 500 Sq.ft, so that the robot could clean the entire pool in about 50 Mins of one working cycle
Dual-drive motors, 65 ft/min forward speed, 2 bottom scrapers, 180 μm fine filter. Strong enough suction to easily pick up dirt, sand, small leaves and drowned bugs, ect., and then filter them.
After finish working, open all lock buckles, detach the top cover, and remove the filter screen.Rinse off all the dirt and debris with running water.
Charger Indicator: Red is "Charging" , Green is "Completed"
A full charge cycle takes only 3-4 hours and provides 50-60 minutes of cordless cleaning.
When the robot detects that it is not in the water, unit will automatically stop running and robot will sound of "Bi Bi" as a reminder.
Cleaner x 1
Charger x 1
Flipper x 1
Retrieving Hook x 1
Screw x 2
Scraper x 2
User Manual x 1
1.Perfect for in-ground pool and above-ground pool in flat ground.
2.Suitable for the pool that the slope gradient is less than 15°.
3.Suitable for the pool that the size is less than 500 ft².
With a single full charge, it can operate for a maximum of 50-60 minutes, (Ps:The actual running time depends on your swimming pool conditions) ,sufficient for cleaning in ground or above-ground pools up to 500 square feet in size.
1.Please charge the battery immediately upon receiving the robotic pool cleaner.Please note that the machine needs to be fully charged before initial use.The indicator light is red when charging, and green when charging is complete.
2.Before charging, dry the charging pins with a dry towel, and then proceed with the charging.
3.When this cleaner is not in use, please charge it every three months for battery maintenance.
When the task is completed, it will automatically return and dock next to the wall. But it does not make a sound or light cue.
1.It requires a universal connector pick-up pole that the diameter is of 1-1/4", which is a universal size to fit standard size pool accessories.
2.There is no aluminum telescopic swimming pool pole in our product package.
When getting stuck, two scrapers need to be removed first and then put it into pool.
The machine should be extracted as soon as possible after finishing the cleaning task and it is not recommended to leave the machine in the water for a long time.